1) (Re)Position your APs Correctly
While it’s not crucial the location where you place your routing and switching equipment. The placement of the network’s access points (APs) is vital in order to get maximum network performance.
Ubiquiti APs such as the UniFi U6 Lite, for instance, transmit in a cone-like. Broad pattern when you look at the front that is the AP (where it’s logo appears). To get the best network performance. You’ll have to place your AP facing into the room in which the highest number of users are. For instance when you’re in an office that has a water fountain and social space on one side of the room. And all the desks on the other the most optimal location for your AP is directly above the desks, about at the center.
In addition, you may prefer to offer WiFi access down the hallway or in the warehouse, where people typically line up in a line. In these situations it’s usually better to put your AP in the wall, prepared to transmit connectivity to the crowd of people.
If you can, try to avoid placing an AP in a location where it will not be in a position to beam connectivity directly to the masses of devices and people who want to make use of that connectivity.
As a rule, you should always place your APs in the ceiling for areas with a high concentration of users or to the wall to provide connectivity over further.
Here are a few examples of areas that could affect connectivity:
-
The corner in the room.
Affixing a wall nearby.
Business leaders who use wireless devices at their desks
Install the AP to the ceiling in order to supply wireless connectivity to areas with many devices.
2) Change Your WiFi Channel
The WiFi channels and bands are in a way similar to a pool. The two bands currently used comprise 2.4GHz and 5.0GHz You’re probably acquainted with both of these. They’re like two segregated parts of the swimming pool. One is for slow swimmers who want to travel a long distance, and another for swimmers who are faster and mtn mifi price, concerned about the distance they travel.
The channel itself is a small slice of the frequencies within a band . It could be considered to be multiple lanes within the pool. Ideally, every swimmer (device) picks a channel (channel) that isn’t in conflict with a lane that is already used by another.
However, it’s not only your network operating in these bands. Many other networks in the vicinity use them as well. It’s useful to use a tool to simply tell the channels that are least utilized and, consequently, is the most efficient to choose.
3.) Reduce the Transmit Power
Before you configure all your APs at full transmit power. Keep to think about how this may have a negative impact on network performance for the users. While a strong AP can transmit a lot when fully powered however. Your WiFi experience is the result of a two-way road. If the device (e.g. your phone) isn’t strong enough to send data back to the AP the data. It doesn’t matter if the AP is able to transmit data to the user.
happy smartphone user making a payment over internet
The ability to reduce your trafficator light transmit power could lead to a better network performance.
4) Optimise Other Network Devices
If you’ve purchased excellent access points that have high network performance. You’ll need to ensure that there aren’t any bottlenecks in the speed of your network.
The first thing you should check is the speed you’re paying for through your ISP as well as the sync speeds you’re receiving to your home. If your ISP is charging you for one particular speed, however. What’s flowing into your router is slow. It’s the fault of your ISP and they’ll need to resolve the issue or provide a discount for their services.
Then it’s your responsibility to ensure that you’re getting the speed you’re paying for when they travel through every component of the network. From your router, to switches for your network. And even your access point itself everything can become bottlenecks in speed If you allow it.
This is why it’s crucial to purchase high-quality hardware from the beginning. If you’re a homeowner and are only using the router that your ISP has provided it’s likely that you’ll want to upgrade. Made in large quantities and designed to make your ISP the least amount of money possible the routers tend to be underpowered. Lacking in features, and are unable to deliver the speeds that you’re likely to want if looking at this article.
5) Switch Meshing On/Off
Certain APs such as Ubiquiti’s UniFi line automatically establish mesh networks that connects them. Unless you turn off the option in the Controller. If your network is using APs with similar capabilities check out whether meshing can enhance or hinder your network performance.
If you’re running multiple APs in your home. The meshing feature could be helpful to facilitate seamless handoff which allows you to move between access points uninterrupted as your device loses connectivity to the initial AP and then connects to the other.
Conclusion
The process of optimizing any network can be a daunting task. If you’re dealing with radio frequency energy that’s hard to test and measure and with a myriad of unique variables in each place, there is no way to get it perfect.
There are a few improvements you can make now that have a high likelihood of altering your network performance to improve it. Test them out today and see what you can do.
